$99.00

Move over Buckets & Carboys, FastFerments are taking over! This 7.9 Gallon Conical Fermenter eliminates Racking & Transferring by doing Primary & Secondary Fermentation in one Vessel. This saves approximately 80% of the time & labor needed to make a batch of beer or wine compared to traditional methods. This method will take less labor, time, and a lot less cleaning!

The FastFerment is a professional system for any and every Homebrewer & Winemaker. The conical design limits exposure to oxygen & allows for yeast harvesting; the end result being consistently high quality batches of beer and wine.

How to FastFerment

Move over Buckets & Carboys, FastFerments are taking over! This 7.9 Gallon Conical Fermenter eliminates Racking & Transferring by doing Primary & Secondary Fermentation in one Vessel.  This saves approximately 80% of the time & labor needed to make a batch of beer or wine compared to traditional methods.  This method will take less labor, time, and a lot less cleaning!

The FastFerment is a professional system for any and every Homebrewer & Winemaker. The conical design limits exposure to oxygen & allows for yeast harvesting; the end result being consistently high quality batches of beer and wine.
Why Use FastFerment?

  1. Guaranteed Consistent Batches
  2. Primary & Secondary Fermentation in the Same Container
  3. No Transfers & No Racking – 80% Less Work
  4. Better Quality Product with No Sediment Contamination
  5. Increased Sanitation with Less Contamination
  6. Less Oxygen Exposure
  7. Ability to Harvest Yeast & Save for Reuse

New Features and Benefits

  1. Easy Cleaning and Batch Stirring – 6″ (15cm) removable screw top
  2. Total Capacity 7.9 US Gallons/ 30 Litres – Made for 5 – 7 Gallon batches with blow offs
  3. Easy Wall Mounting System – Mounts to standard 16″ (40cm) wall studs
  4. 33% Bigger Valve for Increased Flow Rate – 1″ (2.5cm) Bottom valve compared vs. 3/4″ (2cm)
  5. Collection Ball for Yeast Harvesting – Save $100’s & harvest your Yeast Strains!
  6. Temp. Monitoring Capabilities – ThermoWell included – Thermometer Avail.

Kit Contents

  1. One 7.9 US Gallon / 30 Litre Conical Fermenter
  2. 6″ (15cm) Screw Top, Grommet & Airlock
  3. Bottom Collection Ball For Harvesting Yeast
  4. 1″ Union Teflon Valve and fittings
  5. Wall Mounts (2), Mounting Bolts & Anchors (4)
  6. 1/2″ (1.25cm) PVC Hose (4″/120cm) & Hose Clamp
  7. Permanent Thermowell for Temperature Monitoring
  8. Instructions

Specifications

  • Made with HDPE: Food Grade
  • Heights
    • On wall mounts from bottom of collection ball:
      • To top of Airlock: 35.5″, 90cm
      • To top of Lid: 32″, 81cm
    • In the Stand:
      • To top of Airlock: 37″, 94cm
      • To top of Lid: 33.5″, 85cm
  • Widths
    • With Wall Mounting Bolts: 14.75″, 37.5cm
    • Without Wall Mounting Bolts: 14.25″, 36cm
  • 7.9 US Gallons/ 30 Litres
  • 1″ (2.5cm) Teflon Seated Union Valve
  • 6″ (15cm) Removable Screw Top Lid